ACT Sensors Private Limited
ACT Sensors Private Limited
Thane, Maharashtra
GST No. 27AANCA5467H1ZA
TrustSEAL Verified
Call 0804896747372% Response Rate
SEND EMAIL

New Items

Prignitz SPT Pressure Transducer

Prignitz SPT Pressure Transducer
  • Prignitz SPT Pressure Transducer
Get Best Quote
Approx. Price: Rs 2,000 / PieceGet Latest Price
Product Brochure

Product Details:

BrandPrignitz
Part NumberSPT I2 series
Suitable MediaGas
Pressure Range600 mbar-4000 bar
Accuracy0.5% FS
Response Time<1 ms
Output4-20 mA
Supply Voltage0- 32 V
Housing MaterialStainless Steel
Process ConnectionG 1/4
Operating Temperature-40 to 125 Deg C
Country of OriginMade in India
Total Error(+/-)0.25% BFSL
Electrical TerminationMini DIN Hrischmann

SPT I2 series Pressure transmitters are based on piezo-resistive sensing technology where strain gague elements are deposited on stainless steel diaphragm.

Thanks to the latest state of the art SMD electronics and compactall stanless steel construction, these products are extremely robust and reliable.

SPT I2 series pressure transmitters are suitable for all industrial applications, specially on hydraulics or penumatics (presses, pumps, power pack, fluid power, chillers, compressors, etc.) withsevere conditions usually with high level of shock, vibration, andpressure and temperature peaks

Benefits:
  • Low Static and Thermal Errors
  • Wide Operating Temperature Range
  • EMI/RFI Protection Pressure Ranges from Compound ranges up to 600 Bar available on stock

Applications:
  • Chiller Controls
  • Hydraulic Systems
  • Water Treatment Plants
  • Pressure Instrumentation
  • Water Level
  • Boiler Controls
  • Pneumatics HVAC/R Systems.
  • Hydraulic Cranes, Hydraulic Power Packs, Hydraulic Press
Request
Callback
Yes! I am Interested

CO2 Gas Sensor

CO2 Gas Sensor
  • CO2 Gas Sensor
Ask For Price
Product Price :Get Latest Price

    AS-CO2 Carbon-Di-Oxide Sensor

     

    The AS-CO2 Dual-channel CO2 sensor adopts the principle of non-dispersive infrared (NDIR), which has the advantages of small size, long life, fast response, high precision, and continuous analysis.

     

    Non-dispersive infrared (NDIR) gas concentration detection technology uses the principle that gas molecules can absorb infrared light of a specific wavelength, but have no effect on other wavelengths of infrared light to detect gas concentration. The bandpass filter in front of the thermopile sensor is used to filter out infrared light outside a specific wavelength, and then the carbon dioxide gas concentration is obtained by detecting the infrared light intensity of this specific wavelength.

     

    Since carbon dioxide gas has a strong absorption effect on infrared light with a wavelength of 4.26um, and other gases have no absorption effect on infrared light of this wavelength, it can be performed by measuring the intensity of infrared light with a wavelength of 4.26um that passes through the gas layer. Measure the concentration of carbon dioxide gas. Dual channels can eliminate the influence of environmental variables on measurement results


Key Features:

1) MEMS Thermopile element

2) TO Package

3) High sensitivity

4) 4.26/3.95μm Narrow band Filter

5) High accuracy NTC

Request
Callback
Yes! I am Interested

S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES

S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES
  • S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES
  • S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES
  • S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

DisplayDigital

S415 / S418 COMPACT INLINE FLOW AND CONSUMPTION METER FOR COMPRESSED AIR AND GASES

The SUTO S415 and S418 thermal mass flowmeters offer compressed air flow and consumption measurement directly at the point of use. They are designed to be seamless integrated into your compressed air system or in your gas application. These highly economical units will help you improve compressed air system efficiency, while helping reduce compressed air usage and operating costs. Both versions come standard with wireless communication interface to help the user quickly and easily check the flow meter readings or adjust the settings via the SUTO flow meter app.
The S415 is best suited to general process work where low cost and broad monitoring of the compressed air flow is required, while the S418 is ideal for remote locations or high accuracy compressed air flow measurements with its built-in data logger and optional pressure sensing.
Both, the S415 and the S418, are offering an affordable and easy to install solution for monitoring your compressed air flow system.
Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Yogesh Sonawane (Director)
ACT Sensors Private Limited
Plot No F4/1 & 2, Unit No 28 & 29 Ground Floor Phase 2, Ambernath Industrial Area, Badlapur Road, Kansai, Ambernath West
Thane - 421501, Maharashtra, India


Call Us


Send E-mail