Product Details:
Brand | ACT Sensors |
Pressure Ranges | -100,7,10,20,40,100,200 KPa |
Model Name/Number | AS70 |
Material | Sensing Die: Silicon Package Housing: PPS(Phenylene sulfide) |
Output | mV |
Temperature | -30 to 100 Deg C |
AS70 is a surface mounting pressure sensor based on silicon based piezoresistive pressure sensor die.The sensor die is bonded on a substrate with a plastic cap and packaged in a 8-pin SOP.The small size and high reliability of on-chip integration make this sensor a simple and economical choice for high volume application in a variety of industries.With standard SOP8 package, AS70 is easy for users to install by SMT.
With good repeatability, linearity, stability and sensibility, AS70 is very facile for users to calibrate output & thermal drift and make temperature compensation by using exterior operational amplifier or integrated circuit.(For direct application if required,please check AS22 or consult factory.)
The AS70 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application.
Please consult us if a pressure medium other then air is to be used.
Product Details:
Brand | ACT |
Part Number | AS22 |
Type | Differential |
Suitable Media | Gas |
Pressure Range | -100 KPa onwards upto 200 KPa |
Output | 0.5 to 4.5 VDC |
Supply Voltage | 5VDC (3.3VDC option) |
Housing Material | Plastic |
AS22A is a prefect silicon pressure sensor module offering a ratiometric analog interface for reading differential pressure over the specified full scale pressure span and temp.range.It incorporates a silicon piezoresistive pressure sensor chip and an interior signal-conditional Application Specific Integrated Circuit(ASIC) in a SOP8 package with two air vents, which can be mounted directly on a standard PCB.
The AS22 is fully calibrated and temperature compensated for offset,sensitivity, temperature and non-linearity,so AS22 pressure sensor module satisfy the prefect repeatability,linearity, stability and sensibility, which can be applied directly in medical equipments, fitness machine,home electronics,and other pneumatic devices etc.
AS22 pressure sensor module is for high volume application at an affordable cost and perfect performance. Customized calibrations(working voltage,output voltage,and pressure range) are available.
Additional Information:
Product Details:
Brand | ACT |
Part Number | AS21 |
Type | Differential |
Suitable Media | Gas |
Pressure Range | 0 to 145 psi |
Accuracy | +/- 0.5 % |
Response Time | 0.46 ms |
Supply Voltage | 0.5 to 4.5 V DC |
Interface | I2C |
Housing Material | Plastic |
Operating Temperature | -40 to 105 Deg C |
IP Protection Class | IP68 |
Additional Information:
Product Details:
Brand | ACT |
Part Number | AS21A/D |
Type | Absolute |
Suitable Media | Gas |
Pressure Range | +/-2.5kPa upto +/-1000kPa |
Accuracy | +/- 1 % |
Supply Voltage | 3.3 to 5 V DC |
Interface | Ratiometrice or I2C |
Housing Material | Plastic |
Operating Temperature | -25 to 70 Deg C |
IP Protection Class | IP68 |
High functionality, accuracy and reliability
ACT Sensors offers highly reliable and accurate pressure measurements for life critical applications. Low pressure sensors are utilized to control the airflow to the patient as well as the exhalation process and monitor the filter cleanliness. Sensors with high pressure ranges monitor the oxygen tank and air supply pressure. Additionally an absolute sensor can be integrated for barometric compensation to correct for altitude measurement errors. ACT’s comprehensive pressure portfolio covers ultra-low to high pressure ranges, media compatible and stainless steal solutions, analog and digital interfaces.
Applications:
Product Details:
Type | Gauge |
Suitable Media | Gas |
Brand | ACT |
Part Number | AS 60 |
Pressure Range | 0 to 40 KPa |
Output | mV |
Blood Pressure Sensor
AS60 is a surface mounting pressure sensor based on silicon based piezoresistive pressure sensor die.
The sensor die is bonded on a substrate with a plastic cap and packaged in a 6-pin DIP.The small size and high reliability of onchip integration make this sensor a simple and economical choice for high volume application in a variety of industries.
With standard DIP6 package, AS60 is easy for users to install through hole board assembly.
With good repeatability, linearity, stability and sensibility, AS60 is very facile for users to calibrate output & thermal drift and make temperature compensation by using exterior operational amplifier or integrated circuit.
The AS60 DIP6 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application.Please consult us if apressure medium other then air is to be used.
For direct application,please check AS21 which is amplified and compensated pressure sensor series or consult factory.
Product Details:
Brand | ACT |
Part Number | AS21 |
Type | Gauge |
Suitable Media | Gas |
Pressure Range | -100 onwards upto 1500 KPa |
Output | 0.5 to 4.5 VDC or I2C |
Supply Voltage | 5VDC (or 3.3VDC) |
Housing Material | Plastic |
AS21 is a prefect silicon pressure sensor module offering a ratiometric analog interface for reading pressure over the specified full scale pressure span and temp.range. It incorporates a silicon piezoresistive pressure sensor(SOP6) and an on-board Application Specific Integrated Circuit(ASIC) under PC board with a DIP6 package.
The AS21 is fully calibrated and temperature compensated for offset, sensitivity, temperature and non-linearity, so AS21 pressure sensor module satisfy the prefect repeatability, linearity, stability and sensibility, which can be applied directly in medical equipment, fitness machine, home electronics, and other pneumatic devices etc.
AS21 pressure sensor module is for high volume application at an affordable cost and perfect performance. Customized calibrations(working voltage,output voltage,and pressure range) are available.
Additional Information: